Resource Library

Case Study: GORE Low Emission Filter Bags for the Cement Industry

A global cement producer replaced two wet process kilns with a modern preheater/precalciner kiln, boosting output from 1.7M to 2.8M tons annually. GORE® Filter Bags support this upgrade by delivering reliable emissions control, efficiency, and long-term kiln performance.

Case Study: GORE Low Emission Filter Bags for Titanium Dioxide

GORE® Acid Resistant Aramid Felt Filter Bags have long proven effective in TiO₂ dryer baghouses. When new grades with finer particles penetrated stitch holes, Gore’s advanced filter bag design improved capture efficiency, reduced emissions, extended bag life, and minimized downtime.

Case Study: GORE Packaging Vents, A Sustainable Solution for Venting Detergent Containers

Miele partnered with Gore to integrate GORE® Packaging Vents into its TwinDos detergent dispensing system. The innovation supports Miele’s “Forever Better” promise by reducing detergent use by up to 30% while ensuring appliance reliability and long-term performance.

Case Study: GORE SKYFLEX and Boeing CH-47 Chinook Helicopters

The RNLAF used GORE® SKYFLEX® Aerospace Tapes on CH-47 Chinooks, avoiding costly structural repairs and replacements. Proven in operational use, the tapes cut labor, downtime, and lifecycle costs while delivering reliable sealing and protection across helicopter structures.

Case Study: HEPA Knocks Out Need for Water Washing in Air Inlet Filters of Gas Turbines

Alliance Pipeline tested GORE® HEPA Filters on compressor units and found equal pressure drop to standard filters while delivering higher efficiency. The hydrophobic design eliminated costly off-line water washing (OLWW), boosting reliability and reducing maintenance downtime.

Case Study: Membrane based HEPA Air Intake Filters Reduce Compressor Fouling and Corrosion in Gas Turbines

Gas turbine operators face compressor fouling and blade corrosion from dust, soot, and salt, often requiring frequent washes that risk blade cracking in FA machines. GORE® Turbine Filters block contaminants, reduce washing needs, and protect compressors for longer service life.

Certificate: GORE Gasket Tape Series 500 TA-Luft Blow-out Resistance

Certified under TÜV and VDI 2440 standards, GORE® Flange Seals are tested for leak rate, blow-out resistance, and long-term functionality. Rigorous qualification and controlled production ensure reliable sealing performance and verified quality in demanding applications.

Certificate: GORE GR Sheet Gasketing TA-Luft Blow-out Resistance

Certified under TÜV and VDI 2440 standards, GORE® Flange Seals are tested for leak rate, blow-out resistance, and long-term functionality. Rigorous qualification and controlled production ensure reliable sealing performance and verified quality in demanding applications.

Certificate: GORE Joint Sealant TA-Luft Blow-out Resistance

Certified under TÜV and VDI 2440 standards, GORE® Flange Seals are tested for leak rate, blow-out resistance, and long-term functionality. Rigorous qualification and controlled production ensure reliable sealing performance and verified quality in demanding applications.

Data Sheet: Enabling Medical Device Manufacturers to Design Reliable IV Filters

For 20+ years, GORE® Microfiltration Media for Infusion Sets have helped medical device makers design IV filters that evacuate micro-bubbles, contain fluids, and maintain sterility. They deliver consistent performance and stable integration for reliable high-volume production.