Skip to main content

Effective, Cost-Efficient Dioxin and Furan Control

GORE® REMEDIA® Filter Bags help you efficiently meet dioxin and furan emissions requirements without the burden of costly new equipment. These bags are specially developed to filter for dioxins and furans from waste incineration, removing it from your gas stream safely and efficiently. The innovative dioxin filter system is safer for the environment and employees, and simpler to use.

Features & Benefits
Applications
How it Works
Benefits Over Sorbent Injection Systems and Other Dioxin Control Technologies:

Destruction of Gaseous Dioxins & Dust Control

  • Our bags use high-performing, state-of-the-art catalysts to assure long life and levels of destruction that in many cases exceed 99 percent.
  • The microporous structure of the GORE Membrane filters dust, even submicron particles

Lowest Total Cost of Ownership

  • High mechanical strength and durability coupled with a proven long life catalyst, effectively assuring savings well into the future.
  • With no dioxin contaminated sorbents to dispose of, GORE REMEDIA Filter Bags minimize the cost of hazardous waste disposal
  • No need to purchase new equipment: simply replace your current filters
  • No maintenance: Gore's catalytic filter system is completely passive in operation, eliminating any ongoing maintenance demands

Safe for Employees

  • With our filter bags, avoiding carbon eliminates the risk of fires and minimizes potential health risks.
GORE REMEDIA Catalytic Filter Bags simultaneously provide dust control and remove dioxins and furans in the following applications:

Waste-to-Energy

  • Municipal, Hazardous & Medical Waste Incineration

Metals 

  • Secondary aluminum processing
Incineration: Municipal, Hazardous & Medical Waste
Image
GORE REMEDIA Filter Bags work in your existing baghouse, without process modifications or changes to your physical plant.

The GORE REMEDIA Catalytic Filter Bags are installed in some of the world’s largest incinerators to simultaneously provide dust control and remove up to 99% of gaseous dioxin and furan emissions. 

  • In a variety of installations globally (municipal waste incinerators, hazardous, medical and industrial waste, crematoriums and pyrometallurgical plants) the GORE REMEDIA Catalytic Filter System yielded dioxin emissions at levels far below the standard guideline of 0.1 ng (TEQ)/Nm3.
  • Analysis revealed that the concentrations of dioxin in the fly ash using GORE REMEDIA Filter Bags were significantly lower than those achievable using a powder activated carbon (PAC) system.
  • Total dioxin and furan emissions to the environment, including release of both gas and solids from the baghouse, were reduced more than 90% compared to PAC systems – a fantastic achievement for our incinerator filter system.
  • At facilities operating under good combustion practices - a typical inlet dioxin concentration below 10 ng (TEQ)/Nm3 - the GORE REMEDIA Catalytic Filter System is designed to meet and exceed dioxin regulations.
Image
dioxins and furans from waster incineration
GORE REMEDIA Filter Bags represent state-of-the-art catalytic filter technology. 
  • Consist of a GORE Membrane (made of expanded polytetrafluoroethylene - ePTFE), laminated to a catalytic filter media – a specialist felt substrate. 
  • Converts the dioxin and furan emissions, removing them from your gas stream in a highly innovative catalytic purification process.
How GORE REMEDIA Filter Bags Work
  • The GORE Membrane captures fine particulate on the surface of the filter.
  • As the filter is cleaned, solids are released from the surface and collected in the bottom of the baghouse hopper.
  • The gaseous dioxins and furans pass through the membrane into the catalytic filter media. The catalyst instantly reacts with the dioxin and furan molecules to convert them into insignificant amounts of CO2, H2O and HCl.
Image
Dioxin and furan control in Incinerator filter

Combining the principles of surface filtration and catalytic filtration, GORE REMEDIA Filter Bags are a unique dioxin control alternative that works in your existing baghouse to destroy gaseous dioxins and furans to levels far below regulatory limits — safely, economically, and with minimal maintenance.

"The best thing about REMEDIA D/F catalytic filters is that the system destroys dioxin instead of simply capturing it. There were no changes to our process or equipment. In addition, no operator is needed after these filters are installed."

Plant Manager, Municipal Waste Incinerator

Technical Information

GORE REMEDIA CATALYTIC FILTER BAGS*

 

 
Felt contentStaple – Polytetrafluorethylene
Felt constructionScrim – Woven Polytetrafluorethylene
Continuous operating temperature500ºF / 260ºC (maximum)
Maximum surge temperature525ºF / 274ºC (maximum)
Acid resistanceExcellent
Alkali resistanceExcellent

* All specifications are subject to change without notice

Featured Content

Blue stone
Blue stone
Blue stone
/Brochure

Meeting the Dioxin Challenge With Full Confidence In Full Compliance

/Case Study

GORE® REMEDIA® Catalytic Filter Bags Reduce Dioxin Emissions and Save Costs at a Municipal Solid Waste Incinerator in Kochi (Japan)

Explore More

FOR INDUSTRIAL USE ONLY 

Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.

Prefer to Call?

Have questions or unique requirements? 
Our experts are here to guide you.

+1 800 231 4364