+1 800 346 7391
+61 2 9473 6800
+55 11 5502 7800
+86 21 5172 8299
+33 1 5695 6565
+49 89 4612 2211
+91 22 6768 7000
+39 045 6209 240
+81 3 6746 2570
+82 2 393 3411
+52 81 8288 1281
+46 31 706 7800
+65 6733 2882
+34 93 480 6900
+55 11 5502 7800
+46 31 7067800
+886 2 2173 7799
+44 1506 460123
GORE Automotive Vents for Drivetrain and Driveline Components
Data Sheets, 643.46 KB
Designed for high performance in both electrified and traditional drivetrain and driveline components. These compact and waterproof tube-mount vents provide responsive pressure equalization and reliable ingress protection that complies with global OEM standards including water wading, vehicle rollover and fluid containment.
A SINGLE VENTING SOLUTION THAT SIMPLIFIES DESIGN CHALLENGES AND REDUCES OVERALL COSTS
Axles, limited slip couplings (LSCs), transfer cases and power transfer units (PTUs) must perform reliably under rigorous conditions like splashing, submersion or weather extremes.
While other venting methods can protect against most of these conditions, they can also complicate the vehicle design, cause manufacturing issues, and increase labor costs. Validation expenses may also be higher if multiple designs are required. Other venting methods may also add to the vehicle’s weight – making it more difficult to reach weight reduction and fuel economy targets.
GORE Automotive Vents for Drivetrain & Driveline Components deliver high performance in a compact, patented design that:
- Blocks entry of environmental contaminants like dust, grit, dirt and mud
- Prevents water intrusion by withstanding rain, sprays, splashes and submersion
This patented technology is also highly versatile: It’s a single solution to multiple challenges inherent in designing, validating, installing and reliably protecting drivetrain and driveline components.
Unlike other methods, ours delivers reliable venting performance that effectively blocks contaminants – like water, dust and dirt - that can degrade performance.
Preserve seal performance
Only our vents have the breathable GORE™ Membrane. It effectively equalizes pressure under both normal and extreme operating conditions, averting stress on seals.
When you replace conventional vent tubes with these vents, you can achieve significant weight savings.
Our compact vents “design-in” quickly and easily, with fewer parts, space constraints and engineering challenges than other methods. There is no need for complicated routing; no need to keep our vent opening “above the waterline.”
These waterproof vents can eliminate vent-related wading test “fails” and associated engineering redesign time.
Save on installation
Because our vents are fast and easy to install, you can save both time and labor costs.
GORE Automotive Vents for Drivetrain and Driveline Components are extensively tested, evaluated and qualified to perform consistently and reliably.
These rugged Tube-Mount vents reliably equalize pressures, block contaminants and meet global OEM standards for water wading, vehicle rollover and fluid containment.
Please view our current Data Sheet for a more detailed description and complete product and ordering information.
Posted February 25, 2020
Gore presented its groundbreaking automotive total solution during Auto Expo Components 2020. The solution provides greater reliability, durability and versatility to key players in the auto industry, including OEMs and Tier manufacturers.
Lighting the way to the future… with GORE® Automotive Vents at the DVN Workshop in Munich, January 28-29, 2020
January 28, 2020 - January 29, 2020
W. L. Gore & Associates will highlight solutions for reliably protecting automotive components in harsh environments, during the Driving Vision News (DVN) Workshop, January 28-29 in Munich, Germany.
Posted October 16, 2019
Condensation Management Device offers industry’s first solution to actively removing headlamp moisture
Posted October 4, 2018
Headlamp condensation is a recurring problem for the automotive lighting industry. It will become even more of a challenge as the industry moves to full-LED headlamps, because existing venting solutions can only reduce – not sustainably prevent – such condensation.
FOR INDUSTRIAL USE ONLY
Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.