Resource Library

Operating Instructions: GORE Protein Capture Device for Early Clinical Applications, 9.0mL (PROA103)

General handling, antibody purification protocol and troubleshooting guide for PROA103.

Operating Instructions: GORE® Protein Capture Devices for Drug Discovery Applications

General handling, antibody purification protocol, troubleshooting, and ordering information.

Technical Note: Carryover Analysis of GORE Protein Capture Devices with Two Monoclonal Antibodies

This technical note provides evidence based through ELISA assays that the GORE® Protein Capture Device did not have carryover after consecutive cycling of two different cell culture harvests when separated by a 15-minute sanitization cycle using 0.1 M NaOH.

Technical Note: Reverse flow cycles at higher flow rates with the GORE® Protein Capture Device with Protein A

This technical note demonstrates that the GORE® Protein Capture Device (GPCD) PROA201 is capable of reverse flow cycles up to 30srt flow rates to facilitate air expulsion without significant impact to column operating pressure, flow characteristics and binding capacity.

Use Guidelines: GORE® STA-PURE® Flexible Freeze Container

Specially fitted disposable Hard-shell Carriers, suitable for plate or blast freezers, are available as accessories. They are designed to maximize freezer space, make handling easier and further protect tubing in the Container Assembly.

Article: Electric Vehicles' Innovation, and the Human Element in Venting Solutions

Engineering knowledge, simulation software, and testing practices are powerful tools when coupled with human connection.

Article: "What a Drag" Addresses the Benefits of Installing Filter Bags with the Lowest Drag

By installing filter bags with the lowest possible filter drag, cement producers will be able to choose their desired benefit of either 1) fan energy savings, 2) increased airflow, 3) longer filter bag life, or 4) decreased number of installed filter bags.

Article: Breedon Cement Leverages GORE LOW DRAG Filter Bags to Achieve Greater Overall Process Efficiency.

Gore approached Steve Kearsey, Senior Process Engineer at Breedon Group, to introduce the concept of low resistance membrane technology, and to determine if GORE LOW DRAG filter bags could help Breedon Cement to improve on the performance of existing filter media.

Article: Elevate Your EV Performance with Quality and Safety

Discover how EV OEMs and component manufacturers can collaborate with Gore to address industry challenges, such as cost, range and reliability concerns.

Article: Prove Compliance Under the New NESHAP regulations for Cement Plants

The requirement of having to prove compliance with the use of a CPMS increases the chances of unexpected costs and worst case, potential down time.