Resource Library

Dust on dirty tube sheets can make it difficult to isolate the source of dust leaks. Be sure to thoroughly clean tube sheets before doing black light testing.

Dust on dirty tube sheets can make it difficult to isolate the source of dust leaks. Be sure to thoroughly clean tube sheets before doing black light testing.

4 Mistakes That Produce High Pressure Drops in a Baghouse

The challenge of designing electronic devices that stay protected from dust, liquids and pressure becomes increasingly difficult when acoustics are introduced.

GORE® SKYFLEX® Aerospace Tapes a protective barrier between the floorboards and the floorboard structure in the Cabin Wet Areas and the Cargo holds.

Recently introduced technologies such as Protein A membrane devices and tangential flow filtration (TFF) systems capable of handling ultrafiltration and diafiltration of samples as low as 5 mL have significantly decreased the turnaround time.

This document is available upon request.

Two 3.5 mL GORE Protein Capture Devices can be connected in series, which doubles the column capacity by providing a 7.0 mL bed volume and allows capture of at least 200 mg of monoclonal antibody within 60 minutes.

The GORE Protein Capture Device with Protein A can be used as demonstrated in three different manual/semi-automated operations to rapidly purify monoclonal antibodies without an LC unit.

This application note provides data to support sodium hydroxide (NaOH) exposure limits for the 1.0mL and 3.5mL GORE Protein Capture Devices (PROA101 and PROA102). The cycling protocol utilizing 0.5 molar (M) NaOH supports 50 purification cycles with minimal impact to purification yield, device capacity, or assessed purity.

Two cleaning protocols outlined in this application note potentially extend the lifetime of a GORE Protein Capture Device in the event that pressure elevates over the expected lifetime of the device.