Smaller, Lighter-weight Vent Filters for Sterile Gas Filtration
Problems during processing can be costly. When vent filters are large and heavy — as they commonly are — tubes can kink, reducing airflow or blocking airflow entirely. This can lead to losses during processing and lapses in productivity, while the large size of the vent filters can clutter a work area.
GORE Sterilizing-Grade Vent Filters are the smallest, lightest-weight vent filters available for use in small-scale sterile gas filtration today. At a fraction of the size and weight of the larger, heavier 50 mm vent filters commonly used in bioprocessing, our vent filters virtually eliminate handling issues like tubing kinking and limitations due to space constraints.
Manufactured in a manner that adheres to relevant current Good Manufacturing Practices (cGMP), our vent filters help ensure peak performance, and potential time and money savings, by doing more with less.
Efficient Design, Improved Performance
Gore offers unparalleled expertise in expanded polytetrafluoroethylene or ePTFE, an extremely strong, durable polymer that we use to power our vent filters. With our expertise, we’re able to engineer ePTFE membranes to possess performance characteristics that deliver.
A Smaller, Smarter Solution
Commonly used 50 mm vent filters are heavy, causing tubing to kink and reduce or block airflow, which can lead to losses during processing. Typical 50 mm vent filters also take up a lot of space, making them difficult to manage in tight areas. Smaller, lighter-weight GORE Sterilizing-Grade Vent Filters virtually eliminate kinking while their small size helps reduce clutter in the work area.
The Difference is in the Membrane
A close look at the GORE™ Membrane
GORE Sterilizing-Grade Vent Filters provide airflow rates you’d expect from a filtration membrane area many times larger. In fact, our vent filters offer the airflow of other commercially available 50 mm vent filters — but in a smaller, lighter-weight package.
This performance is made possible by the superior high-flow, sterilizing-grade expanded polytetrafluoroethylene (ePTFE) membrane in each filter. Gore is the world leader in understanding ePTFE and its capabilities; we’re able to use that expertise to engineer the membrane to deliver the high-quality performance our customers expect.
Comparison of Typical Airflow Performance
|Liquid Bacteria Retention||Retains a minimum challenge concentration of 1 x 107 cfu/cm2 of aerosolized Brevundimonas diminuta using a method based on ASTM F838-05|
|Aerosol Bacteria Retention||Retains a total challenge of least 1 x108 cfu aerosolized Brevundimonas diminuta per device|
|Bubble Point||Equal to or greater than 12.8 psi (883 mbar) in 70/30% (v/v) mixture of isopropyl alcohol and water|
|Integrity Test||100% tested prior to release|
|Biocompatibility||USP <87> Biological Reactivity Tests In-Vitro
USP <88> Biological Reactivity Tests In-Vivo, Plastics Class VI
|Physicochemical||USP <661> Containers — Plastics, Physicochemical Tests|
|Particulates||USP <788> Particulate Matter in Injections for Large Volume Parenterals|
|Bacterial Endotoxin||USP <85> Bacterial Endotoxin limits|
Detailed test information is available in the GORE Sterilizing-Grade Vent Filter Validation Guide, available upon request.
|Recommended Use||0.25-inch (6.4 mm) inner-diameter tubing|
|Operating Temperature||2°C – 40°C (36°F – 104°F)|
|Maximum Differential Pressure||35 psid (2.4 bar), forward or reverse|
|Maximum Inlet Pressure||40 psig (2.8 bar), forward or reverse|
Maximum of three autoclave cycles for 30 minutes at 135°C (275°F).
Note: Irradiation sterilization methods such as gamma or electron beam should never be used as they may damage or degrade the mechanical and barrier properties of the product.
Compliance & Quality
Gore is committed to providing our customers with rigorously compliant products that deliver high-quality performance over time. GORE Vent Filters are manufactured in a manner that adheres to relevant current Good Manufacturing Practices (cGMP) as defined in the Gore PharmBIO Products' quality system which is certified to ISO 13485 and ISO 15378.
A Certificate of Compliance accompanies each shipment of GORE Sterilizing-Grade Vent Filters.
For more information or to read our most current compliance statements, please contact us.
Visit us at Booth # 8 to learn about the unique advantages of GORE® Turbine Filters, and attend our presentation on November 28 where Gore Associate Craig Nelson will present “Performance advantages from upgrading gas turbine air intake systems to Gore E12 filters.”
The GORE Mercury Control System (GMCS) is a unique fixed sorbent system for capturing elemental and oxidized gas phase mercury from industrial flue gas. The system is based on discrete stackable modules that are installed in an existing flue gas cleaning system. Stop by our Booth #6 to find out why our Mercury Control System provides both high efficiency and a high capacity for removing elemental and oxidized mercury from flue gas streams, and reduces SO2 concentrations. For more information, visit: http://www.kraftwerkskolloquium.de
Stop by Booth B4 to learn how GORE® high efficiency air intake filters can increase gas turbine availability.
Stop by Booth 3126 at the Turbomachinery & Pump Symposia for a look at the latest E12 HEPA V-panel filters from Gore.