Overview

Enclosures and containers are vulnerable. Vulnerable to failed seals, condensation and contamination. Vulnerable to leakage and structural failure.

How likely is an enclosure or container to fail? All it takes is a change in internal pressure that stresses seals. Even a change in temperature or altitude could cause a pressure change, or it could happen because the contents of a container outgas or scavenge oxygen. In the case of mobile devices, enclosures could fail if they’re inadequately protected against liquids, dust and other environmental factors. Whatever the cause, the result could damage a product’s performance and integrity, or even lead to an expensive product failure or significant clean-up.

GORE Vents keep the worst from happening. They allow enclosures and containers to breathe, equalizing pressure and reducing condensation while filtering out liquids and other contaminants. The result: greater product performance, increased durability, higher reliability and peace of mind.

Explore our "App Map" to see dozens of venting applications.

Explore our "App Map" to see dozens of venting applications.

What Would You Like to Vent?

Solutions Across Industries

Gore has paired our technological expertise - particularly in ePTFE, a highly durable and breathable material - with our understanding of venting requirements for automotive components, mobile devices, packaging, outdoor electronics and other devices.

Depending on the application, our vents can:

  • equalize internal pressure to prevents leaks
  • build a barrier to contaminants
  • manage moisture and condensation
  • preserve sound quality in acoustic components
  • enable devices to survive in rugged environments
  • contain challenging or hazardous chemicals in packaging
  • enable fluid dispensing from a container, even hot fluids

We design each vent specifically for its application. Once the vent is built, we thoroughly test it in real-world conditions. As a result, vents are designed to perform to specifications - the first time and every time - and deliver outstanding service life.

Vulnerabilities can lead to product failures, customer dissatisfaction and worse. Manufacturers depend on Gore to deliver venting solutions so they, and their products, can breathe easy.

Contact Us

United States

+1 800 523 4673

Australia

+61 2 9473 6800

Brazil

+55 11 5502 7800

China

+86 21 5172 8299

France

+33 1 5695 6565

Germany

+49 89 4612 2211

India

+91 22 6768 7000

Italy

+39 045 6209 240

Japan

+81 3 6746 2572

Korea

+82 2 393 3411

Mexico

+52 81 8288 1281

Scandinavia

+46 31 706 7800

Singapore

+65 6733 2882

Spain

+34 93 480 6900

South America

+55 11 5502 7800

Sweden

+46 31 7067800

Taiwan

+886 2 2173 7799

United Kingdom

+44 1506 460123

Looking for an easier and more convenient way to order GORE® VENTS?

Gore’s redesigned online store will make ordering products more convenient with 24/7 access, ordering tracking, history and more. 

Learn more: https://www.gore.com/ventsstoreinfo

Note: The online platform is only available to existing GORE® Vents customers. 


Automotive Vents

Improving reliability while reducing design complexity
Red car and new Gore Automotive Vent AVS 120

NEW GORE AUTOMOTIVE VENT AVS 120:

Enables faster clearing from the same part-size as AVS 9.

Learn more.

Each application has its own set of challenges, such as exposure to temperature changes, environmental conditions like water, dust, dirt and debris or even contact with automotive fluids including urea solutions, car wash fluids, and lubricants. Without the correct venting solution in place, these challenges can impact reliability and durability.

OEMs and Tier-1 suppliers worldwide turn to Gore for advanced automotive venting solutions for gas-powered, hybrid and electric vehicle applications. Our ePTFE vents rapidly equalize pressure variations caused by temperature changes while providing a reliable barrier to particulates, debris, water and automotive fluids. More reliable venting performance can reduce the need for heavier housings, seals and gaskets, so component design is less complex, manufacturing costs and time to market are reduced, and global cross-platform integration is simplified. Reliable acoustic venting can enhance the performance of noise-canceling systems, or driver-assistance systems that monitor important traffic sounds such as emergency vehicle sirens.

At Gore, we provide manufacturers with thorough partnership that includes finding the right solution to their challenges and testing our vents to ensure they meet or exceed industry standards and perform to specifications.

We can rapidly integrate a venting solution into your finished product or work with you to create a custom solution. By pairing our ePTFE venting expertise with unwavering standards for performance, we can help you to maintain the integrity of your products for the long term.

Control Units
Automotive Vents - Electronics - Control Units Vents from Gore are used by OEMs and Tier-1 suppliers worldwide in their electronic control units. Our vents are engineered to handle severe temperature and pressure fluctuations, so they provide lasting protection in harsh automotive environments.
Sensors
Automotive Vents - Electronics - Sensors GORE Vents for automotive sensors are performance-tested and qualified in the lab, on the vehicle and in the field. They reliably protect against failure-inducing operating conditions and contaminants, to protect sensors’ integrity and accuracy.
Motors
Automotive Vents - Electronics - Motors Our vents help electronic motors function reliably and durably – just as the designer intended, and just as the customer demands. These venting solutions are designed to optimize motor performance, and to minimize warranty claims.
Hybrid and Electric Vehicles
Automotive Vents - Electronics - Hybrid and Electric Vehicles Hybrid and electric vehicle components are exposed to harsh operating conditions, and high operating temperatures. GORE Vents address those challenges effectively, to enhance component reliability and service-life.

 

Headlamps
Image of red car headlamp Innovative GORE Vents effectively manage condensation while protecting headlamp assemblies from damaging pressure imbalances, water and environmental contaminants in all regions of the world.
Rear Lamps
Image of black car rear lamp GORE® Automotive Vents for rear lamps continuously equalize pressures, protect against ingress of water and contaminants and minimize condensation events, to help keep both clear and colored lenses looking good.
Accessory Lamps
Image of green car accessory lamp Gore’s smallest-footprint automotive vents are a great fit for today’s narrow, extremely space-limited exterior accessory lighting that needs reliable pressure equalization and protection from water and contaminants.

 

Powertrain
Automotive Vents - Powertrain - Drivetrain and Driveline Components GORE Vents can solve the challenges inherent in designing, routing and installing venting for axles, limited slip couplings, power transfer units and transfer cases across global platforms.

 

Acoustics
Automotive Vents - Acoustics
  • Enhance the performance of exterior-mounted microphones
  • Our automotive acoustic vents deliver consistent high-quality sound with life-of-vehicle durability, to help keep sound-monitoring and noise-cancelation systems operating to their fullest capabilities.

 


Packaging Vents

Allow Containers to Breathe Without Leaking

New High Roll-Off Series: Unprecedented performance for your most extreme challenges

New High Roll-Off Series:

Unprecedented performance for your most extreme challenges

Learn more.

New Standard Series: A versatile solution for your “everyday” challenges

New Standard Series:

A versatile solution for your “everyday” challenges

Learn more.

When containers filled with active formulations are not ventilated properly, serious consequence could occur — like bloated or collapsed containers, misaligned pallets, ruined labels and leaks, not to mention costly cleanups and dissatisfied customers.

Risks are even greater when containers are stored, transported or distributed, exposing them to a wide range of altitudes and temperatures that can destabilize pressure and even cause containers to burst. For industrial chemicals and cleaners, agricultural products and household chemicals and cleaners, leaks and ruptures could cause real harm to both users and the environment — unless the containers are properly vented.

Gore’s packaging vents minimize these risks by:

  • allowing air and gas molecules to pass through the membrane, continually equalizing pressure so containers won’t bulge or collapse
  • maintaining airflow even after contact with high-viscous or low surface-tension liquids
  • preventing leakage of dangerous and hazardous liquids

At Gore, we insist on failure-free performance. Our vents are subjected to extensive quality control tests, including thorough camera inspections, to ensure the vent is fit for its use. Additionally, we provide vents that meet the stringent ADR and DOT standards.

Unlike other suppliers, whose vents might clog the membrane or even leak, we provide proven solutions that optimize the safety and compliance of packaging.

The Technology Behind the Vents

What gives our packaging vents their superior performance qualities is expanded polytetrafluoroethylene (ePTFE), the remarkably versatile polymer at the heart of our products.

Gore is the world leader in understanding ePTFE and its capabilities. For each implementation, we use the GOREMembrane to engineer an ePTFE membrane structure with a variety of different properties tailored for both the liquid and its container.

Unlike competitors’ membranes, Gore's membranes are designed specifically for packaging venting applications where uncompromising leak protection and pressure equalization are critical. The GORE™ Membrane has excellent roll-off, so it easily “sheds” liquid and allows continuous airflow. Other membranes, while offering adequate initial airflow, experience poor roll-off when exposed to low surface tension liquids. Such liquids clings to and clog those membranes, reducing airflow and potentially causing serious damage.

This membrane has poor roll-off properties, enabling liquid to clog the membrane and reduce airflow.

This membrane has poor roll-off properties, enabling liquid to clog the membrane and reduce airflow.

The Gore membrane has excellent roll-off properties. Liquid easily drains off the membrane, allowing continuous airflow.

The Gore membrane has excellent roll-off properties. Liquid easily drains off the membrane, allowing continuous airflow.

The ePTFE membranes in Gore’s packaging vents continually release gases while repelling liquid effectively. The result: containers that more reliably protect their contents during shipment and storage.


Protective Vents for Outdoor Electronics

Improve product integrity and increase product longevity
GORE® Acoustic Vents for industrial applications protect the performance and sound quality of outdoor microphones and speakers

GORE® Acoustic Vents for Industrial Applications

Protection enabling reliable performance and enhanced sound quality of industrial acoustic devices.

Learn more.

GORE® PROTECTIVE VENTS & GORE® PERFORMANCE MEMBRANES FOR GAS SENSORS

GORE® PROTECTIVE VENTS & GORE® PERFORMANCE MEMBRANES FOR GAS SENSORS

A broad portfolio to match your particular needs

Learn more.

ENHANCED: GORE® PolyVent Stainless Steel

ENHANCED: GORE® PolyVent Stainless Steel

Now top-rated for mechanical impact resistance.
* IK10 rating applies to this GORE® Vent, not the device.

Learn more.

Harsh environments can decrease the performance reliability and lifespan of sensitive outdoor electronic equipment. Manufacturers and fabricators know that high-performance venting can be the key to improved profitability and product value.

Gore, the global leader in venting technology and expertise, offers a full range of venting solutions engineered to improve the performance reliability and longevity of outdoor electronics.

In lighting, solar and telecommunications systems, and in heavy machinery, transportation or security/surveillance equipment, GORE Protective Vents:

A choice of adhesive, screw-in and snap-in constructions offer production flexibility, and easy integration into any enclosure. For custom venting solutions, Gore can partner with you on everything from initial design to production-line integration.

Adhesive Vents

Adhesive Series

Screw-in Vents

Screw-In Series

Snap-in Vents

Snap-In Series

View test videos that show how our vents protect sealed enclosures from temperature and pressure differentials. Also see how Gore performs a pressure calculation to determine the right vent for your enclosure

Portable Electronic Vents

Leading portable electronic device OEMs collaborate with Gore on innovative venting solutions for everything from high-volume consumer products to ruggedized industrial or mil-spec devices. Gore, the global leader in portable electronic venting, offers custom engineering support and standard products to deliver improved acoustic quality and more reliable environmental protection from liquids, dust, and pressure changes.

a diving person wearing a 10ATM smartwatch

Let Them Know They Can

New GORE® Acoustic Vent and GORE® Pressure Vent for 10 ATM smartwatches

Learn more

GORE<sup>®</sup> Acoustic Vents for Immersion Applications

NEW DESIGN GUIDE

Achieve a better balance of device protection and acoustic performance with GORE® Acoustic Vents.

Download Guide