Cap Liners
Cap Liners provide liquid resistance and airflow for containers
The 3FL Cap Liner from Gore helps to equalize pressure and prevent contamination for containers and bottles that could otherwise bloat, collapse or leak. These unique inserts for cap and closures seal to the container and provide consistently high airflow for venting and excellent liquid resistance to prevent leakage while maintaining container integrity.
Realize the benefits of 3FL Cap Liners from Gore for container venting:
- Equalize pressure to prevent containers from bloating or collapsing without leaking
- Enable the use of thin-walled, light-weight packaging
- Easily adaptable to existing cap-lining equipment
- No need to modify or redesign cap/closure
- Available in a wide array of sizes that simply replaces any existing liner material
The science behind the solution
GORE® Packaging Vents offer the best combination of liquid resistance and airflow through the use of expanded polytetrafluoroethylene (ePTFE). The chemically inert GORE™ Membrane is designed to:
- Prevent liquid penetration of chemicals with strong formulations and aggressive additives
- Equalize pressure in containers by delivering consistently high airflow
- Maintain container integrity
3FL-353 Construction
3-layer construction consisting of:
- GORE™ ePTFE Membrane (in contact with liquid)
- Perforated polyethylene foam layer
- Porous polymer layer (yellow color)
3FL-353 Installation
Can be glued or applied as a friction-fit in the cap.
No hole required in cap.
3FL-323 Construction
2-layer construction consisting of:
- GORE™ ePTFE Membrane (in contact with liquid)
- Perforated polyethylene foam layer
3FL-323 Installation
Can be glued or applied as a friction-fit in the cap.
Hole required in cap.
| Membrane | 100% oleophobic ePTFE |
|---|---|
| Liner Density | 0.48 g/cc |
| Water Entry Pressure | > 0.55 bar |
| Thickness | 1.0 mm |
| Product Forms | Roll Good on 203 mm ID core (Maximum width = 250 mm) Cut Parts packed in flexible tubes (Maximum Outside Diameter = 65.0 mm) |
1 Patent issued (US 7,461,754)
| Membrane | 100% oleophobic ePTFE |
|---|---|
| Liner Density | 0.48 g/cc |
| Water Entry Pressure | > 0.55 bar |
| Thickness | 1.0 mm |
| Product Forms | Roll Good on 203 mm ID core (Maximum width = 250 mm) Cut Parts packed in flexible tubes (Maximum Outside Diameter = 65.0 mm) |
FOR INDUSTRIAL USE ONLY.
Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations
-
Contact Us
To purchase this product or request a quote, please contact us.
