Ordering Information

Product Ordering Information

Standard configurations of the GORE® STA-PURE® Fluid Sampling System are listed in the table below. To order, contact a Gore representative.

Standard systems Part number Composition
Single-valve, 0.75-inch mini sanitary end ACS-1134-G PEI body
0.125 inch ID x 0.25 inch OD PCS tubes
100 ml PE bags
Five-valve, 1.50-inch sanitary end ACS-1135-G
Aseptic separation accessories Part number Composition
GORE® Crimp & Cut Tool ACS-9073 Jaws & Blade — Ni-anodized, hardened 316L SS
1.25-inch crimp collars AMS-4391 304 SS
Safety and convenience accessories Part number Composition
Lever-lock collar for five-valve device ACS-1136 PC
0.75-inch custom-fit flanged gasket for one-valve device ASIL075FL PCS
1.50-inch custom-fit flanged gasket for five-valve device ASIL150FL PCS
Safety caps for separated tube-ends using crimp collars VRR-125X375-6WH PVC
2-inch connection adapter for five-valve device ACS-9074 PEI
Tear-away lever closure shrink-sleeve for one-valve device XCC48515P PET
Tear-away lever closure shrink-sleeve for five-valve device XCC82575P PET
Gamma irradiation GAMMA 20-35 kGy
Ratchet clamp 340TCSP PP

Ordering Information

Gore offers you the ability to order a GORE® STA-PURE® Fluid Sampling System that is configured for your need. To order, contact a Gore representative.

  1. Choose device type
    • Single-valve 0.75-inch mini-sanitary end
    • Five-valve 1.5-inch sanitary end
  2. Choose tubing
    • Clear platinum-cured silicone
    • Color-indicated platinum-cured silicone
    • (red, yellow, blue, green, black)
    • Clear SEBS thermoplastic elastomer (heat sealable)
  3. Choose tubing length
    • 12-inch standard
    • Custom lengths available (recommended 4-inch minimum)
  4. Choose straight, split or custom manifolds with legs
    • Straight tubing leg: standard
    • Overmolded Y: provides two containers per leg
    • Overmolded manifolds: provides three or more containers per leg
  5. Choose collection containers:
    • Film Bags (PE): from 50 to 500 ml
    • Bottles (PETG): from 30 to 500 ml
    • Syringes (PP): from 10 to 60 cc
    • Conical Tubes (PS): 15 ml
  6. Choose container outlets for bags or bottles
    • Luer and Cap
    • Needle-free syringe port and cap
    • ePTFE Vent
    • PP Plug
    • Crimped or heat sealed end
  7. Safety and convenience options (from table above)
    • Lever-lock collar for five-valve device
    • 0.75-inch custom-fit flanged gasket for one-valve device
    • 1.50-inch custom-fit flanged gasket for five-valve device
    • Safety caps for separated tube-ends using crimp collars
    • 2-inch connection adapter for five-valve device
    • Tear-away lever closure shrink-sleeve for one-valve device
    • Gamma sterilization
    • Ratchet clamp