Turbine Filters: Z-Panel Filter
Engineered into a unique Z-shape design the multilayer HEPA filtration media allows this new panel filter to operate with only a single prefilter stage.
Z-Panel Turbine Filters
Turbine Blades

GORE® Turbine Filters – Z-Panel Filter E12

More Power

GORE® Turbine Filters optimize power output by eliminating performance reducing deposits in your compressor section. Their outstanding E12 filtration efficiency keeps out at least 99.5% of contaminants at the most penetrating particle sizes (~0.1 μm). This stops power losses while reducing your fuel consumption and associated CO2 and NOx emissions. Machine availability and reliability are also significantly increased because there is no need to stop the turbine for offline compressor washing.

Less Wear

GORE® Turbine Filters significantly reduce your maintenance costs while increasing compressor and turbine lifetimes. Unlike current air intake filters, they capture at least 99.5% of atmospheric particles, and have a unique patented filter media that is waterproof and provides reliable protection from corrosive salts. This reduces unexpected failures and major outages by preventing both fine and corrosive particulates from reaching the engine. GORE® Turbine Filters also directly replace your existing filters with no modifications required to filter housing.

Features

  • >99.5% Filtration Efficiency at MPPS (E12)
  • Very Low Initial Pressure Drop
  • Long Lifetime With Only One Prefilter Stage
  • Watertight and Salt Repellent
  • High Burst Pressure

Benefits

  • Higher Power Output
  • Increased Turbine Availability
  • No Filter House Modifications Required
  • Less Fuel Costs
  • Less Maintenance Costs

Effect of Compressor Fouling on Power Output

Enlarge

Field Results: Elimination of Off-Line Washes

Enlarge

Protection from Salt and Water

Enlarge

Eliminates Power Loss Due to Fouling

Enlarge


Construction Materials

Filter Media Fully Synthetic Composite with ePTFE Membrane
Frame Polymer
Potting Polyurethane
Gasket PU Foam

Application Performance

Efficiency E12 according to EN 1822
Min. 99.5% @ MPPS
Wet Burst Pressure >5000 Pa (20" wc)
Initial Pressure Drop 135 Pa @ 3400 m3/h
(.53" wc @ 2000 cfm)
180 Pa @ 4250 m3/h
(.71" wc @ 2500 cfm)
Temperature Range -40°C to +55°C
(-40°F to +131°F)
Humidity Range 0 to 100% relative humidity

Dimensions

Frame
(width x height)		 592 x 592 mm
(23.31 x 23.31")

595 x 595 mm
(23.43 x 23.43")

602 x 606 mm
(23.70 x 23.86")
Frame Thickness 20 mm (0.79")

25 mm (0.98")
Depth
(clean and dirty side)		 289 x 310 mm
(11.38 x 12.20")

289 x 313 mm
(11.38 x 12.32")
Minimum required clearance
(width x height)		 558 x 560 mm
(21.97 x 22.05")

550 x 550 mm
(21.65 x 21.65")
Direct replacement of most conventional filters with no modifications required to filter housing.
Enlarge


FOR INDUSTRIAL USE ONLY.

Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations

  • Contact Us

    Contact Us

    Find out more about GORE® Turbine Filters