High Throughput Production 18 GHz Test Assemblies
GORE® PHASEFLEX® Microwave/RF Test Assemblies for high throughput production are engineered specifically to reduce total testing costs for production test environments in the wireless infrastructure market. These assemblies are designed to withstand the frequent torque, bending, and shaking common to test and manufacturing floor environments.
The stable performance ensures precise and repeatable measurements, reducing the risk of testing errors and the need for time-consuming troubleshooting and system calibration. The increased durability and flexibility of these assemblies greatly extends service life and reduces the need for cable replacement, resulting in significant cost savings. Additionally, these test assemblies increase throughput on the manufacturing line by eliminating the need to use a torque wrench.
The unique construction of these assemblies include the following key features:
- Flexible, robust strain-relief boots
- Easy grip, quick-turn connectors; eliminating the need for a torque wrench
- Durable, highly flexible, small diameter cable construction
High Throughput Production Test Assembly Specifications1
Electrical Properties
| Gore Cable Type | 0G | |
|---|---|---|
| Maximum Frequency (GHz) | 6 | 18 |
| Typical VSWR | 1.08:1 | 1.27:1 |
| Typical Insertion Loss (dB) | 1.2 | 2.19 |
| Impedance (Nominal) (Ohms) | 50 | |
| Typical Phase Stability (degree)2 | ± 0.5 | ± 2.0 |
| Typical Amplitude Stability (dB)2 | < ± 0.05 | |
| Dielectric Constant (Nominal) | 1.4 | |
| Velocity of Propagation (Nominal) (%) | 85 | |
| Shielding Effectiveness (dB through 18 GHz)3 | > 100 | |
| Time Delay (Nominal) ns/cm (ns/in) | 0.04 (0.103) | |
Mechanical and Environmental Properties
| Center Conductor | Solid |
| Overall Diameter mm (in) | 5.3 (0.210) |
| Nominal Weight g/m (oz/ft) | 65.0 (0.70) |
| Minimum Bend Radius mm (in) | 25.4 (1.00) |
| Typical Flex Cycles4 | 100,000 |
| Temperature Range (°C) | -55 to 125 |
|
Crush Resistance kgf/cm (lbf/in) |
33.5 (187) |
| Connector Retention N (lbf) | >445 (>100) |
1 The electrical specifications in this table are based on a 1 m (39.4 in) assembly length at 6 GHz and 18 GHz.
3 When cable is wrapped around a 57mm (2.25 in) radius mandrel.
3 Per MIL-STD-1344, method 3008.
4 When bent ± 90˚ at a radius that is twice the minimum bend radius, test assembly performs reliably through the stated flex cycles.
Ordering Information
All sales orders and request for quotes for High Throughput
Production Test Assemblies (Gore’s 0G cable part numbers) should be
submitted directly to Richardson RFPD.Visit www.richardsonrfpd.com.
| Part Number | Cable Type | Connector A | Connector B | Length (cm/inches) |
|---|---|---|---|---|
| 0G0S10S1039.4 | 0G | SMA Male | SMA Male | 100 (39.4) |
| 0G0N10S1039.4 | 0G | Precision N Male | SMA Male | 100 (39.4) |
| 0G0N10N1039.4 | 0G | Precision N Male | Precision N Male | 100 (39.4) |
| 0G0S10S1059.1 | 0G | SMA Male | SMA Male | 150 (59.1) |
| 0G0N10S1059.1 | 0G | Precision N Male | SMA Male | 150 (59.1) |
| 0G0N10N1059.1 | 0G | Precision N Male | Precision N Male | 150 (59.1) |