|
Home > Products > Cables & Cable Assemblies > Microwave / RF Cable Assemblies > Blindmate/Push-On Connectors and Adapters > 100 Series Connectors
GORE™ 100 Series Connectors
 GORE™ 100 Series Connectors are a super high density blindmate/push-on, high performance, microwave interconnect system. The connector series was developed as a response to the industry’s demand for increased packaging density, low
mass, and increased performance at higher frequencies.
The GORE™ 100 Series Connectors offer the lowest profile and mass for modular system designers. The connectors offer performance through 100 GHz while offering superior and repeatable RF properties. The connectors are designed to accommodate both radial and axial misalignment with negligible VSWR change.
The blindmate interfaces are robust and durable while being very light weight. A socket-to-socket bullet weighs less than 0.02 grams. All connector constructions use qualified mil standard materials. Instrument grade test adapters are available to 1.85 mm.
|
Connector Drawing
|
|
|
|
Connector part number: 100-123-0100, GORE™ 100 series socket-to-socket bullet. Dimensions are in inches (millimeters)
|
|
Electrical Performance
|
|
Impedance
|
50 ohms nominal
|
|
Frequency Range
|
DC - 100 GHz
|
|
Temperature Range
|
-65°C to +165°C
|
|
Corona Levels
|
125 VRMS at 70,000 ft
|
|
Dielectric Withstanding Volt.
|
325 VRMS at sea level
125 VRMS at 70,000 ft
|
|
Insulation Resistance
|
5000 megaohms minimum
|
|
RF High Potential
|
200 VRMS at 5 MHz
|
|
Contact Resistance (max)
|
Center conductor 6.0 milliohms
Outer conductor 2.0 milliohms
|
|
Insertion Loss (dB max)
|
0.001 + 0.012*√f (GHz)
|
|
RF Leakage
|
-80 dB at 3 GHz
-65 dB at 3 to 26.5 GHz
|
|
VSWR1 DC to 26.5 GHz
|
1.10:1 typical
|
|
VSWR1 26.5 to 40 GHz
|
1.15:1 typical
|
|
VSWR1 40 to 65 GHz
|
1.25:1 typical
|
1Reference plane to reference plane. Performance listed is typical for the GORE™ 100 series socket-to-socket bullet part number 100-123-0100. Performance on other configurations may vary.
|
|
