|
Home > Products > Cables & Cable Assemblies > Flat Cable > Flat Cable for High Flex and Harsh Environments > GORE™ High Flex Digital Vision Cables > Camera Link High Flex Flat Cable Assemblies
GORE™ Camera Link® High Flex Flat Cable Assemblies
 GORE™ Camera Link® High Flex Flat Cable Assemblies provide motion control and vision systems with reliable interconnects for high performance flex life and signal transmission. These assemblies should be used to avoid bit errors in moving Camera Link® systems. GORE™ Camera Link® High Flex Flat Cable Assemblies provide peace of mind when reliable system performance and equipment uptime are critical.
GORE™ Camera Link® High Flex Cables use quad constructions that are laminated into a flat cable. These assemblies incorporate 26-position 3M MDR connectors to meet Camera Link® electrical requirements as shown below in the Technical Specifications.
GORE™ Camera Link® High Flex Flat Cable Assemblies provide consistent electrical performance over the life of the cable. Chart 1 shows the attenuation of GORE™ Cable compared to an alternative cable. The GORE™ Cable maintains attenuation beyond 5 million flex cycles while the alternative cable degrades quickly at only 100,000 fl ex cycles. The test was performed at 1 GHz with the alternative cable at a 75 mm bend radius and the GORE™ Cable at a more strenuous bend radius of 47 mm.
Chart 1: Attenuation vs. Flex Cycles
Camera Link® flex life analysis with attenuation at 1 Ghz. Alternative Camera Link® on a 75 mm bend radius and GORE™ Camera Link® on a more strenuous 47mm bend radius
Key Features
-
Cables can be customized for unique requirements
-
Flat cable is non-particulating for clean room use
-
Incorporates 26-position 3M MDR connectors
Key Benefits
Technical Specifications
|
Test Parameter
|
Typical Value |
Camera Link Standard |
Units |
| Eye Opening |
>40
|
>40
|
%
|
| Attenuation |
|
|
|
| 100 MHz |
-0.35
|
-0.34
|
dB
|
| 1000 MHz |
-1.4
|
-1.4
|
dB
|
| Interpair Skew |
25
|
50
|
ps/m
|
| Intrapair Skew |
40
|
50
|
ps/m
|
| Impedance |
100±10
|
100±10
|
ohm
|
| Crosstalk |
|
|
|
| NEXT |
<0.1
|
≥ 4
|
%
|
| FEXT |
<0.1
|
≥ 4
|
%
|
Ordering Information
|
GORE™ Camera Link® High Flex Flat Cable Part Numbers
|
Lengths Available (m) |
|
GSC-06-24540-00
(Bulk flat cable)
|
200 m (minimum)
|
|
GSC-17-25335-XXX (Flat cable assembly with 26-pin MDR connectors and molded backshell with jack screws)
|
2.0, 5.0, 7.0
|
|
|
